Stone Tile Cleaning & Restoration Blackwater

Limestone eventually looses its initial appearance. The surface damage is caused by foot traffic scratching and etch marks The only way to reinstate the original shine is through polishing the tiles. We make full use of industrial-grade equipment and industrial diamond tooling to grind, hone and polish the Limestone.

If your floor has been laid leaving jagged tiles, it is referred to as “lippage”. The only way to make a Limestone floor smooth is by grinding off the lippage and irregular tile edges. Limestone floor grinding is an expert process, bringing incredible results. The Limestone floor looks "monolithic", appearing to be produced from a single area of stone.

Following grinding, the Limestone tiles be flush with the grout lines. It is much easier to clean a smooth, sleek Limestone than a bumpy floor. There will be no uneven grout deressions to trap soil. If your Limestone floor has chips and cracks, we could repair them using resin fillers, colour matched with the Limestone. After we have inspected the Limestone, we can advise the very best Limestone restoration process.

Get more informationabout our Limestone cleaning Blackwater services in addition to our extensive stone floor cleaning restoration solutions or Book your free Quote

Slate floors look fantastic using their distinctive appearance and stunning colour. Cleft slate will get a build-up of soil inside the crevices this is certainly difficult to get rid of.

We use a mixture of machine scrubbing and hand scrubbing to get rid of all traces of older soiled sealers and clean the floor. Once our professional cleaning is complete,finally, we use a lasting sealer which also makes your floor more straightforward to mop.

If you have the right slate, it may be ground smooth, making it easier to clean.

Read more about our Slate cleaning and sealing Blackwater work as well as our extensive stone cleaning  services or Book a Quote

Victoran clay geometric floor tiles are installed in Victorian and Edwardian Hallways.

Victorian tiles are made of natural clay with a normal non-shiny finish.

Quite a lot of these floors have been sealed and then covered up with carpet and lino.

Old paint spills, polishes, waxes and sealer deposits makes cleaning these kinds of floors tricky.

After cleaning, the initial colours of the tiles can appear washed out, therefore we apply a colour intensifying impregnating sealer to restore the original depth of colour. A topical sealer or wax finish can give the floor tiles with a high-sheen finish.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Blackwater work plus our comprehensive professional cleaningservice or Book a Quote

Porcelain has started to become an progressively preferred option to ordinary ceramic tiles and natural stone.

This makes Porcelain a lot more stain resistant and easier to maintain than standard ceramic tiles.

Some inferior porcelain has surface pores that will absorb soil similar to natural stone floors. If you've got a substandard Porcelain, the surface soil could be hard to remove.

We are able to get rid of embedded soil using equipment built to enter into the microscopic pits where the soil is held.

After cleaning, we apply specialist Porcelain sealers to stop this problem.

If the porcelain is a through-colour, we are able to resurface the porcelain, just like granite or Stone restoration.

Read more about our Porcelain Tiles Cleaning Blackwater floor restoration work and also our comprehensive professional cleaning systems or Book a Quote.

There are often elements of natural stone restoration when natural stone cleaning. Natural stone floor restoration covers many different services. All stone and tile floors suffer from surface damage and general wear issues. In many cases, soil, spots and traffic scuff marks ruin floor's finish, subsequently the need to have stone restoration. A polished granite or Stone floor shows wear more quickly since traffic wear that will quickly wear he finish and alter the shine. A surface sealer does not avoid porous stone and tiles like Limestone, Sandstone and Terracotta gradually struggling with wear and spill damage.

Almost all tile floors have cement grout lines. As it is slightly concave, which means that the grout traps more dirt compared to the natural stone itself. Cracks, chips and hole repairs will often be part of the restoration work.

Resurfacing removes damage from etch marks and surface marks.Natural stone has the advantage that a dirty, porous finish can be removed, exposing a lovely new surface.