Stone Tile Cleaning & Restoration New Milton

Limestone eventually looses its original surface. This surface damage is due to foot traffic scratching and etch marks Limestone Polishing is the best way to bring back the initial polish. We use diamond polishing to re-surface a Limestone floor and repair the original surface.

If the tiles are not even, perfectly even this condition is referred to as "lippage". A Limestone tile floor can be leveled by grinding off the lippage and uneven edges of the tiles. Limestone tile grinding is a professional procedure, that provides great results. The Limestone floor will have the look of becoming a single piece of stone.

After grinding, the tiles and the grout will be at the exact same level. An even Limestone finish is much simpler clean. There will be no grout lines to hold dirt. If your Limestone has chips or cracks, we could repair them using resin fillers, colour matched with the Limestone. The particular restoration needed will be determined by the state of the floor.

Get more informationabout our Limestone cleaning New Milton service as well as our wide-ranging stone floor cleaning restoration treatments or Book your free Quote

Slate is a tremendously popular floor and wall tile due to its low porosity and the numerous varieties and textures of Slate available. Although slate has a low porosity, it will probably always partly absorb and oil based spills, causing irritating marks.

We use a combination of machine and hand scrubbing to get rid of all traces of existing dirty sealers and clean the slate. After our professional cleaning is finished , the floor is left to dry, then put on a lasting, easy to maintain sealer.

If you want a smooth finish, we are able to grind the floor, but we must measure the slate before grinding.

Discover more about our Slate cleaning and sealing New Milton service in addition to our comprehensive stone cleaning  work or Book a Quote

Victorian Clay or Minton geometric floor tiles are installed in Victorian and Edwardian Hallways.

The tiles are unglazed with the the natural colours of the clay used to make them.

Owing to their age, these floors have had lots of wear and often have layers of different sealers.

The primary challenges with victorian floor tiles is removing decades of oils, polishes, waxes, dirt and grime without doing damage to the floor tiles.

After cleaning, the initial colours in the tiles can appear dull, so we use a colour intensifying sealer to replace the original . A topical sealer or wax finish will provide the floor with a high-sheen finish.

Find outabout our Victorian Minton Tiles cleaning and sealing New Milton work plus our entire professional cleaningservices or Book a Quote

Porcelain is actually a ceramic mix with sand and feldspar included to produce a denser tile.

This helps make Porcelain a lot more resistant to stains and easier to maintain than traditional ceramic tiles.

Inferior porcelains have tiny holes which will absorb soil just like natural stone floors. It can be difficult to remove this soil.

We know how to remove embedded soil with equipment designed to get into the microscopic pits where the soil is held.

Our Porcelain sealers will help stop further soil problems.

Solid colour Porcelain Tiles can certainly be ground and polished, the same as Granite or Stone.

Learn more about our Porcelain Tiles Cleaning New Milton floor restoration services and our comprehensive professional cleaning solutions or Book a Quote.

There tend to be aspects of natural stone restoration when natural stone cleaning. Natural stone floor restoration usually takes many forms. All stone and tile floors suffer from wear and surface damage. Foot traffic damage, stains and surface damage shows up on most stone and tile floors, damaging the appearance, making the stone appear worn and unappealing, subsequently the significance of stone restoration. A polished Stone or granite floor shows wear more quickly due to traffic wear that will begin to damage he polish and alter the gloss. Porous stone and tile that is sealed with a coating sealer will gradually sustain wear deterioration.

Grout is frequently probably the most sensitive part of a natural stone installation. Dirty grout is a very common problem to be solved on natural stone and tile floors. Cracks, chips and hole repairs are frequently a part of the restoration work.

We get rid of acid etching and scratching by resurfacing.Natural stone has got the appeal that a grubby, permeable finish can be removed, uncovering a beautiful new surface.